QPA vs GPA: What’s the Difference and How to Calculate Both

Blog

QPA (quality point average) and GPA (grade point average) are usually the same thing under different names: total quality points divided by total graded credits. Quality points are credits multiplied by grade points, and the only real difference between schools is how much each plus or minus grade is worth.

Key takeaways

  • QPA (quality point average) and GPA (grade point average) use the same math: total quality points divided by total graded credits.
  • Quality points for one course = credits × grade points for the letter grade you earned.
  • Your cumulative average comes from adding up all quality points and all credits, not from averaging semester GPAs.
  • Plus and minus values differ by school, so use your own school’s scale.

QPA vs GPA: Is There Actually a Difference?

For most students, no. QPA and GPA are two names for the same idea: a credit-weighted average of your grades on a 4.0 scale. Some schools, notably the University of Pittsburgh, use “QPA” on transcripts, while most US colleges say “GPA.”

The calculation is identical. What changes from school to school is the value each letter grade carries, especially plus and minus grades. That is why the free calculators in the EduCalcDb calculator library are built around each school’s published scale instead of one generic chart.

A few schools do draw a line between the two terms. At Pitt, for example, the Provost’s office has described the QPA as the average tied to the courses relevant to your degree goal, while the cumulative GPA covers all Pitt credits at your career level. If your transcript shows both numbers, check your registrar’s definitions before you assume they match.

What Are Quality Points?

Quality points are the building blocks of any QPA or GPA. Each letter grade has a grade-point value, and you multiply that value by the course’s credit hours.

The formula is simple:

  • Quality points = credit hours × grade points
  • QPA or GPA = total quality points ÷ total graded credit hours

So an A (4.0) in a 3-credit class earns 12 quality points, while the same A in a 1-credit lab earns only 4. Heavier courses pull your average harder in both directions.

Pass/fail, satisfactory/unsatisfactory and incomplete grades usually earn no quality points and are left out of the credit total. Rules vary, so check how your school treats withdrawals and repeated courses.

How to Calculate Your QPA Step by Step

Here is the process for one semester:

  1. List every graded course with its credit hours.
  2. Look up the grade-point value of each letter grade on your school’s scale.
  3. Multiply credits by grade points to get quality points for each course.
  4. Add up all quality points and all graded credits.
  5. Divide total quality points by total credits and round to two decimals.

Worked Example: One Semester at Pitt

Say a Pitt student takes four courses. Pitt’s grading regulation values an A− at 3.75 and a B+ at 3.25.

CourseCreditsGradeGrade pointsQuality points
Calculus4A-3.7515.00
General Chemistry3B+3.259.75
English Composition3A4.0012.00
Intro Psychology3B3.009.00
Total1345.75

The semester QPA is 45.75 ÷ 13 = 3.519, which rounds to 3.52. You can check your own numbers with the Pitt QPA and GPA calculator, which uses Pitt’s quarter-point plus/minus values.

Semester vs Cumulative QPA

Your semester (term) QPA covers one term. Your cumulative QPA covers every graded credit so far. The mistake many students make is averaging the two numbers.

Worked Example: Updating a Cumulative Average

Suppose the same student entered the semester with a 3.40 cumulative QPA over 30 credits.

  • Previous quality points: 30 × 3.40 = 102.00
  • New total quality points: 102.00 + 45.75 = 147.75
  • New total credits: 30 + 13 = 43
  • New cumulative QPA: 147.75 ÷ 43 = 3.436, or 3.44

Simply averaging 3.40 and 3.52 would give 3.46, which overstates the result because the earlier 30 credits outweigh this semester’s 13. Always work from quality points and credits.

If you are trying to protect a cumulative average late in the term, it also helps to know exactly what you need on your final exam to land a target grade in each class.

Why Plus and Minus Grades Differ by School

There is no national standard for plus and minus values. Schools generally follow one of three patterns:

  • Quarter-point steps: Pitt’s University Grading regulation sets an A− at 3.75 and a B+ at 3.25. An A+ is still 4.00.
  • 0.3 steps: Virginia Tech and the University of Kansas use 3.7 for an A− and 3.3 for a B+. KU’s University Senate rules say plus and minus grades are calculated as .3 units above or below the letter grade.
  • Thirds: Northeastern’s catalog grade table lists an A− as 3.667 and a B+ as 3.333.

Law school applicants face one more scale. LSAC’s Credential Assembly Service recalculates your undergraduate record on its own conversion table, where an A+ counts as 4.33, according to LSAC’s transcript summarization page.

ScaleA+A-B+
Pitt4.003.753.25
Virginia TechNo A+ listed3.73.3
University of KansasNot covered here3.73.3
NortheasternNo A+ listed3.6673.333
LSAC CAS4.333.673.33

How Much Do These Differences Matter?

For one semester, not much. The same four grades in the Pitt example produce 3.52 on Virginia Tech’s scale and 3.51 on Northeastern’s. Over a full transcript with many minus grades, or with several A+ grades under LSAC’s conversion, the gap can grow enough to matter for honors cutoffs, scholarships or applications.

That is why EduCalcDb keeps school-specific tools. Hokies can use the Virginia Tech GPA calculator with the 0.3-step scale, and pre-law students can preview their CAS number with the LSAC GPA calculator. Calculators for Northeastern, KU and other schools are collected in our GPA calculators category.

Tips for Getting an Accurate QPA

  • Use the scale printed in your school’s current catalog or registrar policy, not a generic chart.
  • Count only graded credits. Leave out pass/fail and incomplete courses unless your school says otherwise.
  • Check how your school handles repeated courses before recalculating.
  • Keep two decimals of quality points until the final division, then round.
  • Remember that graduate programs, law schools and scholarship committees may recalculate your average on their own scale.

If your grades in a class are curved, run the curved score through one of the grade curve calculators first, then plug the resulting letter grade into your QPA. And if you also earned college credit through AP exams, our look at AP score distributions explains how those scores compare nationally.

Calculate it on your school’s scale

Use the Pitt QPA calculator or browse every college GPA calculator built on official grade points.

Frequently Asked Questions

Is QPA the same as GPA?

In most cases, yes. Both are credit-weighted averages on a 4.0 scale, calculated by dividing total quality points by total graded credits. The name depends on the school. Pitt has long used QPA on transcripts, while most colleges use GPA. A few schools define the two slightly differently, so check your registrar’s definitions.

How do I calculate my QPA?

Multiply each course’s credit hours by the grade points for your letter grade to get quality points. Add up the quality points for all graded courses, then divide by the total graded credits. For example, 45.75 quality points over 13 credits gives a QPA of 3.52. Use your own school’s plus and minus values.

Why is an A-minus worth 3.75 at Pitt but 3.7 at Virginia Tech?

Each school sets its own grading scale. Pitt moves in quarter-point steps, so an A-minus is 3.75 and a B-plus is 3.25. Virginia Tech and KU use 0.3 steps, giving 3.7 and 3.3, while Northeastern uses thirds, giving 3.667 and 3.333. The math is the same; only the values differ.

Can I average my semester GPAs to get my cumulative GPA?

Only if every semester had exactly the same number of credits. Otherwise, add up all quality points and all graded credits from every term, then divide once. Averaging semester numbers gives too much weight to light semesters. The school-specific calculators on EduCalcDb handle this by working from credits and quality points.

Written by the EduCalcDb Editorial Team

Every article is researched against official College Board, school district and university sources, and checked against the matching calculator before it is published. Spotted something out of date? Tell us.