Pitt GPA Calculator
GPA planningCalculate GPA with editable course rows and credit values.
| Course | Credits | Grade | Remove |
|---|---|---|---|
Estimate your University of Pittsburgh GPA on the official 4.00 scale using Pitt’s exact grade-point values and quality-points-per-credit method.
The Pitt GPA calculator converts your University of Pittsburgh letter grades and credit hours into a 4.00 scale semester or cumulative GPA in seconds. Enter each course’s grade and credits, and the tool multiplies your grade points by credit hours to produce quality points, then divides by total credits — the exact quality-points-per-credit method Pitt’s registrar uses. It applies Pitt’s official grade-point values, including the school’s distinctive plus/minus increments, so your estimate matches your transcript.
How the Pitt GPA Calculator Works
At the University of Pittsburgh, your GPA (Pitt also calls it a QPA, or Quality Point Average) is the numeric indicator of academic achievement on a 4.00 grade point scale. Every letter grade carries a fixed number of grade points. The calculator multiplies each grade’s point value by that course’s credit hours to get quality points, sums the quality points across all courses, and divides by the total GPA credit hours attempted.
This Pitt GPA Calculator handles both a single-term semester GPA and a running cumulative GPA. Because Pitt does not round GPAs up, the calculator reports the true unrounded figure — important when you are near a Dean’s List or Latin honors cutoff.
Inputs: each course’s letter grade (A+ through F) and its credit hours; optionally your prior cumulative GPA and total credits to project a new cumulative figure. Outputs: total quality points, total GPA credits, and your University of Pittsburgh GPA on the 4.00 scale. Non-GPA marks — S, NC, N (audit), W, I, G, R, T, H, and Z — carry no quality points and are excluded automatically.
University of Pittsburgh Grading Scale
Pitt uses a plus/minus system, but its increments are not the common 3.3/3.7 pattern. Notice the wider gaps: an A− is worth 3.75 grade points and a B+ is 3.25 — values many other schools set at 3.7 and 3.3. Using Pitt’s exact numbers is what separates an accurate estimate from a rough guess. The table below lists the official grade points (quality points per credit) for each letter grade.
| Letter grade | Grade points (per credit) |
|---|---|
| A+ | 4.00 |
| A | 4.00 |
| A− | 3.75 |
| B+ | 3.25 |
| B | 3.00 |
| B− | 2.75 |
| C+ | 2.25 |
| C | 2.00 |
| C− | 1.75 |
| D+ | 1.25 |
| D | 1.00 |
| D− | 0.75 |
| F | 0.00 |
Pitt does not use a single official percentage-to-letter conversion; individual instructors set the point ranges for each letter grade in their syllabi. That means the grade points above — not a fixed percentage — are the authoritative inputs for GPA. Marks such as S (Satisfactory), NC (No Credit), W (Withdrawal), I (Incomplete), and N (Audit) neither earn quality points nor count as GPA credit hours.
How to Calculate Pitt GPA
The formula is the same one Pitt’s registrar applies to your transcript:
GPA = Σ(credit hours × grade points) ÷ Σ(credit hours)
Worked example. Suppose a first-year student takes four graded courses in one term:
| Course | Credits | Grade | Grade points | Quality points |
|---|---|---|---|---|
| Composition | 3 | A | 4.00 | 12.00 |
| General Chemistry | 4 | B+ | 3.25 | 13.00 |
| Calculus I | 4 | A− | 3.75 | 15.00 |
| Intro Psychology | 3 | B | 3.00 | 9.00 |
| Total | 14 | — | — | 49.00 |
Add the quality points (12.00 + 13.00 + 15.00 + 9.00 = 49.00) and divide by total GPA credits (14): 49.00 ÷ 14 = 3.50. That 3.50 semester GPA would place this student on the Dean’s List in the Dietrich School, provided no grade fell below a C. To find your cumulative GPA, add this term’s quality points and credits to your prior totals and divide again — the calculator does this automatically when you enter your previous GPA and credit count.
How to Use the Pitt GPA Calculator
Follow these steps to get an accurate University of Pittsburgh GPA estimate:
- List every graded course for the term along with its credit hours (most Pitt courses are 3 or 4 credits).
- Select the letter grade for each course from A+ through F. Leave out S/NC, audit, withdrawn, and incomplete courses — they do not affect GPA.
- The calculator multiplies each grade’s point value by its credits to compute quality points for that course.
- It sums all quality points and divides by total GPA credit hours to display your semester GPA.
- To project a new cumulative GPA, enter your current cumulative GPA and total earned GPA credits; the tool blends them with the new term.
- Compare the unrounded result against Pitt’s Dean’s List (3.50) and Latin honors (3.25/3.50/3.75) thresholds.
Pitt GPA Policies: Honors, Plus/Minus, and Repeats
Dean’s List. In the Kenneth P. Dietrich School of Arts and Sciences, you earn a place on the Dean’s List by completing at least 12 letter-graded credits in a term (courses taken S/NC do not count toward the 12) with a term GPA of 3.50 or higher and no grade lower than a C. Some schools, such as Pitt Business, apply the same 3.50 term-GPA standard; always confirm your own school’s rule.
Latin honors. Pitt awards graduation honors on your cumulative GPA: cum laude at 3.25, magna cum laude at 3.50, and summa cum laude at 3.75. You must complete at least 60 letter-graded credits at the University of Pittsburgh to be eligible, and GPAs are not rounded up — a 3.749 does not become a 3.75.
Plus/minus handling. Pitt’s plus and minus grades use the exact point values in the scale table above. Because an A+ and an A both count as 4.00, an A+ cannot lift your GPA above 4.00.
Repeated courses. When you repeat a course under Pitt’s repeat policy, only the most recent grade and its credits count toward your GPA. The original course and grade stay on your transcript but are removed from the GPA calculation. Pitt generally permits a course to be repeated at most twice, so plan retakes carefully.
QPA vs. GPA. Pitt’s cumulative QPA reflects all University of Pittsburgh coursework relevant to your degree, while the cumulative GPA shown on the transcript reflects credits completed at your career level. For undergraduates in a single program, the two figures typically match.
Related GPA and Grade Calculators
Explore more tools to plan your grades and track academic standing. Browse the full library of GPA calculators, or compare methods at another school with the VT GPA Calculator. Planning for law school? The LSAC GPA Calculator recomputes your GPA under law-school admissions rules, which count every attempt of a repeated course. To work backward from a target grade, try the Grade Curve Calculator or the wider set of grade & curve calculators. For study strategies and grading guides, visit the study guides.
Frequently Asked Questions
What grade point values does Pitt use for plus/minus grades?
University of Pittsburgh uses non-standard increments: A+ and A are 4.00, A− is 3.75, B+ is 3.25, B is 3.00, B− is 2.75, C+ is 2.25, C is 2.00, C− is 1.75, D+ is 1.25, D is 1.00, D− is 0.75, and F is 0.00. These are wider than the common 3.3/3.7 pattern, so use Pitt’s exact numbers for an accurate GPA.
How is GPA calculated at the University of Pittsburgh?
Multiply each course’s credit hours by its grade points to get quality points, add up all quality points, then divide by the total GPA credit hours attempted. In formula form: GPA = Σ(credits × grade points) ÷ Σ(credits). Pitt applies this quality-points-per-credit method on a 4.00 scale.
What GPA do I need for the Dean’s List at Pitt?
In the Dietrich School of Arts and Sciences you need a term GPA of at least 3.50 while completing at least 12 letter-graded credits, with no grade lower than a C. Courses taken on the Satisfactory/No-Credit option do not count toward the 12-credit minimum. Other Pitt schools use similar standards but confirm your own.
What are the Latin honors GPA cutoffs at Pitt?
University of Pittsburgh awards cum laude at a 3.25 cumulative GPA, magna cum laude at 3.50, and summa cum laude at 3.75. You must complete at least 60 letter-graded credits at Pitt to be eligible, and GPAs are not rounded up.
Does an A+ raise my Pitt GPA above 4.00?
No. At Pitt an A+ is worth 4.00 grade points, exactly the same as an A. A+ recognition may appear on your transcript, but it cannot push your GPA above the 4.00 maximum.
How do repeated courses affect my Pitt GPA?
When you repeat a course under Pitt’s repeat policy, only the most recent grade and credits count in your GPA. The original grade remains visible on your transcript but is excluded from GPA totals. Pitt generally limits a course to two repeats.
What is the difference between Pitt’s QPA and GPA?
Pitt’s cumulative QPA (Quality Point Average) covers all University of Pittsburgh coursework relevant to your degree goal, while the cumulative GPA on the transcript is based on credits completed at your career level. For most undergraduates in one program, the two values are the same.
Which grades are excluded from my Pitt GPA?
Marks that carry no quality points and are not counted as GPA credit hours include S (Satisfactory), NC (No Credit), N (Audit), W (Withdrawal), I (Incomplete), G, R (Resignation), T (Transfer), H (Honors), and Z. Only standard letter grades A+ through F enter the GPA calculation.
Why doesn’t my Pitt GPA match a calculator that uses 3.7 for an A-minus?
Many generic calculators assume an A− equals 3.7 and a B+ equals 3.3. Pitt instead uses 3.75 and 3.25. A Pitt-specific calculator applies the university’s official values, so it will match your transcript while a generic one may be slightly off.